Since you’re taking a sitz bath to promote healing to injured tissue, you want to be extra sure that the environment is sterile. Use a bleach-based cleaning product to sterilize the bathtub before drawing your sitz bath. Scrub the tub thoroughly to make sure you’ve removed all the soaps and other bath products that have accumulated on the surface. Rinse the tub thoroughly to remove both the soaps and the cleaning products. It’s very important that the water you use in your sitz bath is warm, but not scalding hot. The temperature should not cause any discomfort that could cause irritation or inflammation. Warm water, though, will increase blood flow to the injured tissue, speeding up the body’s healing process in that area.
Make sure that the bathtub is plugged so the water doesn’t drain out, then run the water until there’s enough water in the tub to fully immerse the area that’s giving you trouble. Mix soothing additives to the water if you wish. You don’t need to add anything to the water, as the warm temperature alone will make you feel better. However, there are many things you can add to your bath to treat different problems. Ask your doctor for a recommendation on what to add to your bath. Salt is a good general additive for any sitz bath, regardless of the reason. 2 cup of table vinegar to the salt water solution.
An herbal solution is good for treating hemorrhoids, as well as damage from tissue trauma like giving birth. 8 drops of lavender essential oil, and 8 drops of chamomile essential oil, with the water for your bath. Make sure that the problem area is completely covered in the warm bath, and soak in the bath for at least 15 to 30 minutes. Run warm water as necessary to keep the temperature of the bath up. You must be very gentle with the damaged tissue after your sitz bath, so don’t rub yourself dry as you normally would. Use a clean, soft towel, pat and dab until the area has been dried. Scrubbing or rubbing can cause irritation and further injury.
You can often find a sitz bath kit in the medical supply section of the grocery store, or your local pharmacy. If you can’t find a sitz bath kit locally at a store, you can purchase them easily online. Even if your kit is new out of the package, you want to make sure that you’re not exposing your damaged tissue to possible infection. Clean the basin thoroughly with a bleach-based cleaning product. Scrub well and rinse with water. Once you get your bath set up, you can just sit and relax while it does its work. But first, you have to set it up.
Place the tube through the hole in the basin that’s used for circulating the solution throughout the bath. Consult the directions that came with the kit if you’re having trouble locating the tube hole. Snake the tube all the way to the center of the basin and clip it into the bottom of the bowl. Consult your kit’s instructions for a diagram if necessary. Fill the solution bag with warm water, or whichever solution you’d like to use to treat the damaged tissue. Put the basin and bag in place. Making sure the toilet seat is up, place the basin over the inner rim of the toilet.
- What to use to get rid of hemorrhoids
- Thrombosed external hemorrhoid burst bleeding
- Do hemorrhoids make your stomach hurt
- When do u need surgery for hemorrhoids
- Is it ok to use hemorrhoid cream while pregnant
- How long for an external hemorrhoid lump to go away
- How to relieve thrombosed hemorrhoid while pregnant